Select the Filament icon to load or unload filament.

    Loading Filament

    Use the control panel dial to select Load Filament.

    1. Wait for the Smart Extruder+ to heat.
    2. Cut the end of your filament to create a clean edge.
    3. Grasp the top of the extruder assembly and push the filament into the extruder's loading tube until you can feel the motor pulling the filament in.

    Unloading Filament

    1. Use the control panel dial to select Unload Filament.
    2. Wait for the Smart Extruder+ to heat.
    3. Allow the extruder to unload the filament.
    4. When the extruder has stopped pushing the filament out, gently pull the filament free. If you are changing filament spools, be careful to keep the spool tightly wound as you pull the filament free of the guide tube. If you do not, the filament could unravel or tangle on the spool.

    Need Help?

    Call our Support team
    Monday — Friday | 9am — 6pm ET

    +1 925 529 8563

    Activate Your Service Plan

    Register your device to ensure you get the right level of service and support.

    What can we help you with today?
    I want to chat with Sales.
    I have a question about an existing order.
    I have a technical question about my device.
    Existing Orders
    For faster service, enter your order number
    (found in your confirmation e-mail)