Cancel
Top Search Terms

Loading Filament

    Which Filament?

    The MakerBot Replicator Mini+ is optimized for small (0.22 kg) spools of MakerBot PLA filament.

    Installing a Filament Spool

    Insert the spool into the filament spool pocket in the back of the MakerBot Replicator Mini+, with the filament windows on the spool facing forward, so that the spool unwinds in a counterclockwise direction. Be careful to keep the spool tightly wound at all times.

    Locate the end of the spooled filament and pull it free from the spool. Insert the end of the filament into the filament guide tube. Push filament through the tube until the free end emerges from the end of the guide tube.

    Loading Filament into the Smart Extruder+

    Via MakerBot Mobile:

    1. Open the MakerBot Mobile App and connect to the MakerBot Replicator Mini+.
    2. Open the MakerBot Mobile App and connect to the MakerBot Replicator Mini+.
    3. Tap Filament.
    4. Tap Load Filament and then Continue. The Smart Extruder+ will start to heat up. When the Smart Extruder+ is fully heated, the extruder motor will start feed filament in the appropriate direction. 
    5. Cut the end of your filament to create a clean edge.
    6. Grasp the top of the extruder assembly and push the filament into the extruder's loading tube until you can feel the motor pulling the filament in. If you're running into a problem during this process, unload the filament and repeat step 5. It may help to press the lever on the side of the extruder and gently feed filament towards the hot end at this point.
    7. When you see plastic emerging from the extruder nozzle, tap Done.

    Having trouble?

    Click here for help troubleshooting.


    Need Help?

    Call our Support team
    Monday — Friday | 9am — 6pm ET

    +1 925 529 8563

    Activate Your Service Plan

    Register your device to ensure you get the right level of service and support.

    What can we help you with today?
    I want to chat with Sales.
    I have a question about an existing order.
    I have a technical question about my device.
    Continue
    Existing Orders
    For faster service, enter your order number
    (found in your confirmation e-mail)
    Skip
    Submit