Ways To Fight Warping

    What is warping?

    Sometimes you may see edges or corners of your print peeling away from the build plate. We call this warping or curling, and it happens because plastic expands when it’s heated and shrinks when it cools. As the hotter layers of your print closer to the extruder cool, they create a strain on the lower layers, pulling them inwards and causing them to curl away from the build plate.

    Warping can be a big problem, especially on larger prints. Fortunately, there are a number of adjustments you can make to fight warping.

    What you can do

    1. Replace damaged build plate tape.

    Wrinkles, rips or visible wear on the build plate tape will decrease your print’s adhesion to the build plate, making it easier for the plastic to peel up.

    2. Clean the build surface.

    Dust and oil from your hands can make it harder for plastic to adhere to the build surface. To clean the build surface, wipe it down with acetone or isopropyl alcohol and a lint-free cloth.

    3. Try Helper Disks.

    Helper disks are thin, flat disks you can add to your print in MakerBot Print. They pin down problem areas, like corners, by creating more surface to adhere to the build plate, and they’re easy to remove when the print is completed. For more on helper disks, click here.

    4. Adjust the build plate height.

    If your build plate seems to be too far from the extruder during printing, you might need to adjust the Z-axis offset.

    5. Print in a warmer environment.

    The colder your printing environment, the bigger the difference in temperature between the plastic coming out of the extruder and the parts of your print that have already cooled. Uneven heating can also cause problems, so don’t put your printer next to a fan or an open window.

    6. Print slower.

    Slower extruder speeds will help your print adhere to the build plate and give it time to cool more evenly. You can change your extrusion speeds in the Add a Custom Setting section of MakerBot Print.

    Need Help?

    Call our Support team
    Monday — Friday | 9am — 6pm ET

    +1 925 529 8563

    Activate Your Service Plan

    Register your device to ensure you get the right level of service and support.

    What can we help you with today?
    I want to chat with Sales.
    I have a question about an existing order.
    I have a technical question about my device.
    Existing Orders
    For faster service, enter your order number
    (found in your confirmation e-mail)